FABRICATION ~ CHIP TURNING ~ CNC

We buy/sell/broker anything that has to do with Metal Manufacturing, Fabrication, Heavy Fabrication, Welding, and Chip Turning.
Including, but not limited to, CNC and Manual Machines, Brakes, Plate Rolls, Lathes, Boring, Press,Vertical and Horizontal Machining Centers, CNC Lathes.
Production of tanks, Dishing Press's, Spinning, Flanger & Flanging equipment for making dished end production is one of our specialties.

800 Ton 4 Post Lake Erie Hydraulic Press
"VIDEO AVAILABLE BELOW" 

1 – USED 800 TON LAKE ERIE 4-POST DOWN ACTING HYDRAULIC PRESS


S/N: 2861


800 Ton Rated Capacity


52” Stroke


76” Day Light


160” X 96” Bed Area


24” Dia. Main Cylinder


26” Shut Height


Pressing Speed 22” PM @2,200 PSI @800 Tons


Return Speed 150” PM @86.5 Tons


Closing Speed 250” PM 


Requires A Small Pit


T-Slotted Bed & Ram Face


1” T-Slot’s F to B & R to L on 16” Centers


Weight: 210,000 Lbs. Est.


Floor Space 70” R to L x 170” F to Back x 264” HT.


Complete With 75 H.P. 220/440/3/60 Hydraulic Pump Motor, Electrical & Hydraulic Controls 


As Taken From Service


GA Drawings Available                     Price - On Location $99,500.00 


Bed size 12' for the upper bed and the lower bed is 13' 4"


Distance between posts- 7' 10"


Speed Fast advance, pressing, fast return-- don't know


The main ram is 30" in diameter - the main dial goes up to 1000 pressure 


Overall height from top to the bottom- 23' (maybe a few inches off)


the pit that the machine is in is 30" deep


This machine is hydraulic


The press was built in 1948


The press was rebuilt in 2007


The rebuild consisted of the cylinders, pumps, hydraulic and electrical controls and they added a box for vibrators... 


06 are the gauges, 07 the  plate above the gauges, 012 top front, 13- side hoses for the vibrator they added to the machine.  

Thank you for contacting us. We will get back to you as soon as possible
Oops. An error occurred.
Click here to try again.