2012 VDL-2400 CNC 3 Axis Vertical Machining Center(Never Used in Production ~ Exhibition Machine)94.4" x 25.6" x 26" (2400mm x 650mm x 660mm)
2012 VDL-2400 CNC 3 Axis Vertical Machining Center
(Never Used in Production Exhibition Machine)
94.4" x 25.6" x 26" (2400mm x 650mm x 660mm)
Type: VDL2400 CNC 3-Axis CNC Vertical Machining Center
Work Table Size: 2600x660mm (102.3" x 26")
Work Load Capacity: 2000kgs (2.2 US Tons)
CNC Controller: Fanuc Oi-md
SPECIFICATIONS:
Table (L × W) mm 2600×660 (102.3" x 26")
T-slot (Numbers × Width × Distance) (b/t slots) mm 5×18×125 Table load Max kg 2000
X-axis travel mm 2400 (94.4")
Y-axis travel mm 650 (25.6")
Z-axis travel mm 660 (26")
Distance from spindle center line to column guide way surface mm 748
Distance from spindle nose end face to table upper surface mm 280~940
Cutting speed of X/Y/Z axis mm/min 1~10000
Rapid traverse speed of X/Y/Z axis m/min 20/20/20
Spindle speed range r/min 45~6000
Spindle taper No. 50
Spindle motor power kW 11/15
Tool magazine capacity / Type 24/swing arm
Tool adaptor and pull nud BT50/BT50x45°
Max. Tool weight kg 15
Max. Tool diameter mm 125/250
Time of tool change (T-T) sec 3.5 X/Y/Z servo motor power Nm 22/22/22
Positioning accuracy mm X:0.018 Y/Z:0.015
Repeat positioning accuracy mm X:0.08 Y/Z:0.006
Air pressure requirement MPa 0.5~0.8
Overall dimension (L × W × H) mm 5700×4200×3230 Net weight kg 12000
STANDARD ACCESSORIES:
Automatic Tool Changer (ATC)
Spiral Chip Remover
Full-closed Safety Cover
Simple Oil-water Separator
Auto Lubricating System
Rigid tapping
Foundation Bolts and Cushion Block
M30 Auto Power-off System
Tool kit
Chip Handcart
$89,995.00 FOB Truck Midwest USA
