We buy/sell/broker anything that has to do with Metal Manufacturing, Fabrication, Heavy Fabrication, Welding, and Chip Turning.
Including, but not limited to, CNC and Manual Machines, Brakes, Plate Rolls, Lathes, Boring, Press,Vertical and Horizontal Machining Centers, CNC Lathes.
Production of tanks, Dishing Press's, Spinning, Flanger & Flanging equipment for making dished end production is one of our specialties.

1998 FPT LEM 935 High speed, Universal Spindle, Ram Type, HMC CNC Mill
"5 AXIS"

1998 FPT LEM 935 High speed, Universal Spindle, Ram Type, Horizontal CNC Mill


X axis (table): 2.5M (100”)

Y axis (spindle head): 1.5M    (59”)

Z axis (Ram): 1.2M (48”)

B axis (rotary) +/- 180 degrees x 1 degree

A axis (tilt) +/- 95 degrees x 1 degree


Size: 3M x 920mm (119” x 37”)

Load capacity: 6.5 metric tons (14,300lbs) * Owner says the mill was built to support 15 M tons.

                 (X-ballscrew is 100mm diameter, Table ways are more than 170mm wide)


Automatic universal spindle attachment: 27Kw/3000RPM/ISO 50

Max torque: 1400 nm (1050 lbs/ft)

Gear ranges: 2- 1000 rpm Low/3000 rpm High


Heidenhain TNC 430


Feed: 6M/min (240 ipm)

Rapid: 15M/min (600 ipm)


Full enclosure (new 2014)

Rebuilt spindle head 2014

Automatic tool clamping

Console mounted operator panel

Flood coolant system

Lift up chip conveyor

Price, As Is, On location………………………………………………….$124,500.00 USD

Thank you for contacting us. We will get back to you as soon as possible
Oops. An error occurred.
Click here to try again.