1/2" x 96" (13mm x 2438mm) Leifeld PLB 1200 Spinning Lathe
The specifications for this lathe are as follows:
50HP UPGRADED HYDRAULICS FROM 24HP
PLB-1200
Bought new in 1957. One Owner.
It has a 96 inch swing
50 HP hydraulic system which is only 6 years old and rarely used.
25 HP main spindle drive which was rebuilt and also rarely used.
Has all longitudinal feeds A standard PS 60 slide.
All new seals which were replaced not too long ago.
Base that the longitudinal feed sits on has an extended bed.
This will actually go up to 1/2" (13mm) thickness because of the after market increased Horse Power on the main motor, and the increased hydraulics capacity. The other sizes of the machine are for a standard PLB-1200.
50HP UPGRADED HYDRAULICS FROM 24HP
PLB-1200
Bought new in 1957. One Owner.
It has a 96 inch swing
50 HP hydraulic system which is only 6 years old and rarely used.
25 HP main spindle drive which was rebuilt and also rarely used.
Has all longitudinal feeds A standard PS 60 slide.
All new seals which were replaced not too long ago.
Base that the longitudinal feed sits on has an extended bed.
This will actually go up to 1/2" (13mm) thickness because of the after market increased Horse Power on the main motor, and the increased hydraulics capacity. The other sizes of the machine are for a standard PLB-1200.
