FABRICATION ~ CHIP TURNING ~ CNC

We buy/sell/broker anything that has to do with Metal Manufacturing, Fabrication, Heavy Fabrication, Welding, and Chip Turning.
Including, but not limited to, CNC and Manual Machines, Brakes, Plate Rolls, Lathes, Boring, Press,Vertical and Horizontal Machining Centers, CNC Lathes.
Production of tanks, Dishing Press's, Spinning, Flanger & Flanging equipment for making dished end production is one of our specialties.

2000 Ton Horizontal Hydraulic Engel Extrusion Press

2,000 Ton ENGEL Extrusion Press; Horizontal Hydraulic Type; MFG: 1995


1- Used 2000 Ton ENGEL Extrusion Press; Horizontal Hydraulic Type; MFG: 1995

Specifications:

 Press:

 Type.................................................... 4 Post/Horizontal 

Extrusion Force................................... 2000 Tons @ PSI (max.)

 Stripping / Return Force..................... 250 Tons @ PSI 

Stroke (Advance Slide)...................... 40" (nominal)

 Stroke(Ram)....................................... 40" (nominal)

 Daylight Opening................................ 150"

 Distance Between Tie Rods................. 55" Vertical x 72" Horizontal

 Main Ram Diameters (4)...................... 22" (est.)

 Tie Rod Diameter(4)............................ 12"

 Distance Floor to Press Centerline........ 50" (est.)

 Speeds:

 Advance................................................. 180" / Min.

 Pressing (Extrusion).............................. 50" / Min.

 Opening (Return)................................... 210" / Min. 

 Container System:

 Billet Diameters....................................... 8"/9" /10" 

Billet Length.......................................... 25" 35" (nominal) 

Container Diameter (outside)................ 30" (est.)

 Container Length................................... 25" - 35"

 Container Heating System..................... Electrical Strip Type

 Travel of Container Housing.................. 36"

 Force of Travel / (Closing)..................... 200 Tons @ 3000 PSI

 Force of Travel / (Opening)................... 100 Tons @ 3000 PSI

 Speeds:

 Closing............................................ 180" / Min.

 Opening........................................... 150" / Min.
 Billet Shear:

 Type................................................. Vertical/ Hydraulic

 Capacity........................................... 100 Tons (est.)

 Stroke.............................................. 12"

 Speed.............................................. 12 Seconds (cycle duration) 

Die System:

 Die Diameter................................... 10" 12"

 Die Thickness................................. 4" 8"

 Shuttle Stroke.................................. 40" (est.)  

 Hydraulic System:

 System Manufacturer..................... Continental

 System Pressure............................. 1,500 psi

 System Capacity............................ 1,000 gal.

 System Horsepower (total)............. 400

 Number of Pumps.......................... 4

 Pump Specifications:

 Unit #1................................ 100 hp

 Unit #2................................ 100 hp

 Unit #3................................ 100 hp

 Unit #4................................ 100 hp

 Primary Drive Motors:

 Manufacturer....................... Ajax

 Horsepower Rating............. 400 HP @ 1,750 RPM

 Electrical Characteristics.... 208 / 230 / 460 V.A.C. 3 phase / 60 cycles

Equipped With:
 Complete Hydraulic Controls

 Complete Electrical Controls  

Overall Dimensions:

Press Only: 132" Wide x 312" Long x 152" High (Est.)

 Hydraulic Unit Only: 
Weight:

Press Only: 350,000 lb (est)

 Hydraulic Unit Only: Price: $ 845,000.00 USD

Thank you for contacting us. We will get back to you as soon as possible
Oops. An error occurred.
Click here to try again.

2500 Ton Schloemann Extrusion Press

TYPE: HORIZONTAL DIRECT
POWER OF MAIN RAM: 2,325 TONS
POWER OF ADVANCE RAMS: 275 TONS
TOTAL POWER: 2,500 TONS
PIERCING FORCE: 350 TONS
PIERCER PULL BACK FORCE: 140 TONS
EXTRUSION STEM STROKE: 1,800 mm
MAX. BILLET LENGTH: 710 mm
BILLET DIAMETER: 250 mm
CONTAINER SEALING FORCE: 220 TONS
CONTAINER PULL BACK FORCE: 310 TONS
NEW OIL GEAR PUMPS INSTALLED: 1990

OILGEAR MAIN PUMPS: (3) PVV-540 165 GPM. DRIVE 350 HP x 3
OILGEAR AUX. PUMP: (1) PVW H 45 DRIVE 40 HP
OILGEAR PILOT PUMP: (1) PVWH 34 DRIVE 75 HP
CONTAINER SEALING PUMP: (1) PVWH 11

NEW CRASS HEAD INSTALLED 1998
NEW BILLET HEATER CONTACTOR INSTALLED 1995 AND 2000

PRESS LINE CONSISTS:

-SCHLOEMANN 2,600 TON HORIZONTAL DIRECT EXTRUSION PRESS WITH
INTERNAL PIERCER DISCARD SAW, OIL HYDRAULIC.
-BILLET STORAGE TABLE
-BILLET HEATER FEED CONVEYOR
-TWIN INDUCTION BILLET HEATERS
-BILLET LOADING SYSTEM
-DISCARD AND TOOLING CONVEYOR
-UNDER WATER EXTRUSION SYSTEM WITH HEAT EXCHANGER
-40 m RUNOUT TABLE
-PLC ALLAN BRADLEY PLC 5 TOUCH SCREEN
-ELECTRICAL CONTROL CABINETS
-LARGE QUANTITY OF SPARE PARTS AND TOOLING
-BILLET SHEAR

SPARE PARTS LIST:

-DUMMY BLOCKS 118
-CLEANER RING 32
-DIE HOLDER 7
-DIE HOLDER RING 4
-DIE HOLDER BACKING PLATE 3
-NEW MANDREL 152
-MANDREL ADAPTER 1
-MANDREL HOLDER 4
-STEM 4
-CONTAINER 3
-BOLSTER 4
-SUB BOLSTER 3
-BILLET HEATRE XFMR 1
-BILLET HEATRER COILS 2
-CONTAINER ROD WITH SUPERNUT 1
-LOW PRESSURE / CONTAINER SEAL PUMP 1
-BILLET LOADER RODS 2
-BILLET TRAYS / PALLETS AND PALLETIZER
-ALL THE DIES
-GREASE GUN AND MECHANISM
-COILER AT THE END OF THE RUN OFF TABLE
-ELECTRIC MOTORS (GE 1775 RPM 40 HP)
-SPARE PLC (MODEM / SCREEN CONTROL)
-LINERS

-FURNACE IS 2 x 965 PEAK KW INDUCTION, ON 70/30 BRASS,
BILLET SIZE 7 x 12" IT WOULD GIVE 8,500 LBS/HOUR.
BUT 13,650 WAS ACHIEVED ON CU TUBE.

SHIPPING WAS CALCULATED AT THE FOLLOWING:

11 - 40 FOOT OPEN TOPS
2 - 20 FOOT OPEN TOPS
1 - 20 FOOT FLAT RACK
1 - BREAK BULK PIECE OF 120 TONS (43 FOOT x 9 FOOT x 9 FOOT.

REMOVED AND IN STORAGE 

Thank you for contacting us. We will get back to you as soon as possible
Oops. An error occurred.
Click here to try again.