FABRICATION ~ CHIP TURNING ~ CNC

We buy/sell/broker anything that has to do with Metal Manufacturing, Fabrication, Heavy Fabrication, Welding, and Chip Turning.
Including, but not limited to, CNC and Manual Machines, Brakes, Plate Rolls, Lathes, Boring, Press,Vertical and Horizontal Machining Centers, CNC Lathes.
Production of tanks, Dishing Press's, Spinning, Flanger & Flanging equipment for making dished end production is one of our specialties.

36" ~ 56" x 156" LeBlond Model NK 3220 CNC Gap Bed Lathe Retro 2014 

36" ~ 56" x 156" LeBlond Model NK 3220 CNC Gap Bed Lathe Retro 2014 


                        Complete Retrofit completed January 2, 2014 


New, GE Fanuc 21 iT CNC Control  Machine Serial Number: 3NK855 


GENERAL CAPACITY: 


Swing over bed and carriage wings: 36” 


Swing over cross slide: 20 ½” 


Swing over 24” wide gap: 56” (approx) 


Distance between centers (max. turning length) in increments of 24”: 156” Steady Rest Capacity, min. and max. diameter, standard size: 1 ¼” to 12” Steady Rest Capacity, min. and max. diameter, oversize: 9 ½” to 20” 


Follow rest Capacity, min, max. diameter: 1 ½” to 7” 


Face plate diameter, small (standard equipment): 14” 


Distance, spindle center to floor: 43” 


Chuck Size: 36” 4-jaw chuck 


HEADSTOCK: 


Spindle speeds, number: 36 


Spindle speeds range: 5.4-600 rpm 


Spindle diameter at bearings –front, center, rear: 8”, 6”, 4 5/16” 


Front spindle bearings, two Timken #0, outside diameter: 12 1/2”          Radial load at 100 rpm…………………………………………….: 106,800 lbs. 


         Thrust load at 100 rpm…………………………………………….: 47,700 lbs. 


Center spindle bearing, outside diameter: 8 858”           Radial load at 100 rpm…………………..: 23,300 lbs. Read spindle ball bearing, outside diameter: 7 7/8”           Radial load at 100 rpm………………………: 21,790 lbs. Spindle, diameter of hole, straight: 3 1/16” 


Spindle, diameter of hole, taper (No. 350 ASA): 3 1/2” 


Spindle, size of center: #6 Morse 


Spindle nose, standard taper key drive, size: L3 


Spindle nose, diameter, large end of taper: 6 1/2” 


Headstock length on bed: 48 5/8” 


CARRIAGE AND COMPOUND REST: 


Length on ways: 46 3/4”     


Bearing surface, square inches: 415 


Bridge width: 15” 


Cross slide travel, with taper attachment: 21 1/2” 


Price on Location: $320,000.00

Thank you for contacting us. We will get back to you as soon as possible
Oops. An error occurred.
Click here to try again.