FABRICATION ~ CHIP TURNING ~ CNC

We buy/sell/broker anything that has to do with Metal Manufacturing, Fabrication, Heavy Fabrication, Welding, and Chip Turning.
Including, but not limited to, CNC and Manual Machines, Brakes, Plate Rolls, Lathes, Boring, Press,Vertical and Horizontal Machining Centers, CNC Lathes.
Production of tanks, Dishing Press's, Spinning, Flanger & Flanging equipment for making dished end production is one of our specialties.

15.4' (185") X 12 to 16Ga STAMCO Model 65
Drum Type "CORRUGATING ROLLS"

15.4' (185") X 12 to 16Ga STAMCO Model 65 Drum Type "CORRUGATING ROLLS"

                                                                                                             

S/N 1753


Manufactured in 1946 

 

12 To 16 Ga. Max. Capacity Mild Steel Depending Upon 

The Contour Of The Corrugations

 

185” Length Of Rolls With (6) Sides Each

 

146” Standard Length Dies

 

Manual Hand Wheel Roll Adjustment

 

Housings Are Heavy Mill Type Construction

 

Roll Bearings Are Bronze Bushings

 

Rolls Are Solid Steel Forgings

 

Gear Reduction Bearings Are Anti-Friction

 

Timing Cam And Backlash Gears

 

12 RPM Roll Speed      

 

NOTE:  Two Sets Of Dies Are Mounted At The Same Time, Each Set Takes 1/2  Of The Drum Length.

 

Good Condition


Floor Space:  8’ x 35’ x 7’9” Ht.

 

WEIGHTS:

 

Base Rails:        3,400 Lbs. Each

 

Housings:          4,000 Lbs. Each

 

Rolls:             15,400 Lbs. Each

 

Gear Box Assembly: 7,200 Lbs.

 

Motor:             400 Lbs. Approx.

 

Dies  (2 Sets):    6,000 Lbs. Each Set

 

Total Machine Weight With Dies And Motor: 88,000 Lbs., Approx.



Complete With:


25 HP 440/3/60 Motor

Electrical Controls

Gear Box Assembly

Gear Guards

Centralized Lubrication System

Operating Manual

And Two Sets Of 12 Dies (6 Each Set). 


All specifications are assumed to be correct but must be confirmed by purchasing entity.


Price: $29,500.00 USD FOB Transport Eastern OHIO

Thank you for contacting us. We will get back to you as soon as possible
Oops. An error occurred.
Click here to try again.