FABRICATION ~ CHIP TURNING ~ CNC

We buy/sell/broker anything that has to do with Metal Manufacturing, Fabrication, Heavy Fabrication, Welding, and Chip Turning.
Including, but not limited to, CNC and Manual Machines, Brakes, Plate Rolls, Lathes, Boring, Press,Vertical and Horizontal Machining Centers, CNC Lathes.
Production of tanks, Dishing Press's, Spinning, Flanger & Flanging equipment for making dished end production is one of our specialties.

1500 Ton x 30'/40' Cincinnati Mechanical Press Brake Model 50 Series x 20'

1500 Ton x 30'/40' Cincinnati Mechanical Press Brake  

Model 50 Series x 20'

 

EQUIPPED WITH:

5' Extensions on each End of Bed & Ram

(This brings over bed & Ram length to 40')  

Ram Adjustment Motor  

Ram & Bed Machined For Angles - Set Of Angles  

Twin End Drive w/Gear Guards - Automatic Lube System  

Air Assist Friction Clutch w/Remote Foot Pedal  

Electrical Controls  

 

CATALOGUE SPECIFICATIONS:  

Tonnage Rating @ Bottom Of Stroke 1,500 TONS 

Tonnage Rating @ Mid Stroke 1,500 TONS 

Bending Capacity (Max) 12' x 1"  

Overall Length Of Bed & Ram 40' 

Distance Between Housings 20.5' 

Factory Horns are Approx. 5'-6" each

Added Rams are Approx 5' each 

Stroke Of Ram 6" 

Power Ram Adjustment 6" 

Strokes Per Minute 5 SPM  

Throat Depth 16" 

Die Space (SDAU) 16" 

Standard Strokes Per Minute 20 & 5 SPM 

Motor, Horsepower 50 HP 

Electrics 220/440/3/60 

Floor Space Required Approx. 10' x 40' 

Height Above Floor 12'-9" 

Weight, Approximately 372,000 LBS 

(Added Approx 5000 Lbs. for the additional Horns)

  

NOTES:  Required Min. 6' Pit For Bed Plate

Found To Be In Very Good Operating Condition upon my inspection.

The company just spent $7000 on upgrade and replacement of the MAIN DRIVE Wheel and shaft.  

Thank you for contacting us. We will get back to you as soon as possible
Oops. An error occurred.
Click here to try again.